Bay of Quinte Skyway Bridge Rehabilitation

Header Right Menu

Skip to content

Home

Primary Menu

Skip to content

Project Overview
Lane Closures
- Notifications
Project Photos
Schedule
Map
FAQs
Contact Us
Useful Links

Search

Search for:

July 2022

South abutment formwork and rebar

Jacking the bridge for bearing work

Jacking the bridge

View north, rebar and formwork installation

160-ton crane lifting concrete finisher work platform

160-ton crane mid-lift, concrete finisher work platform

Lowering the work platform to the deck

Close-up, lowering the concrete finisher into place

Disconnecting the crane

Hooking-up rebar to be lowered from the deck

Preparing to lower rebar

Removing materials from the deck

160-ton crane lowering the concrete finisher to the bridge deck

160-ton crane lowering the excess rebar

Removing materials from the crane

Containment on pier base 12

Starting to move the barge / manlift

Moving the barge / manlift into place at pier 12

Telehandler delivering the generator to the barge

Bush hammering and drilling on pier 1

Piers 1, 2 and 3

Close-up drilling for dowel installation on pier 1

Pier 14 haunch

View south of the bridge deck

View north concrete finisher

Concrete work platform

Preparing materials for south abutment formwork / rebar

Working on south abutment rebar / formwork

View north completed rebar, concrete finisher

Concrete Finisher

Telehandler delivering the fuel cube to the 110-ton crane

Lowering the crane chains to the fuel cube

Lowering the fuel cube to the deck

Removing the work platform on pier base 10

Removing the pier base 10 work platform

Light base formwork

110-ton crane lowering lumber to the deck

110-ton crane lowering materials to the deck for formwork

Hooking the 110-ton crane to materials to be lifted

Preparing to lower materials to the deck

Pier 14 diaphragm formwork

Building the diaphragm formwork

South abutment

Cleaning / preparing for concrete placement

Preparing for concrete placement

Vacuuming the formwork before concrete placement

Starting the dry-run prior to concrete placement

Expanded view, concrete finisher / dry-run

Close-up, concrete finisher on the screed rail

160-ton crane starting to lift the debris bin

Removing the debris bin, mid-lift

160-ton crane lowering the debris bin to the ground

Telehandler removing the debris bin

Removing the generator from the deck

160-ton crane lowering the generator to the ground

Removing material for shoulder widening

Excavator loading the truck

Preparing for shoulder widening for new curb and guiderail

Excavator digging for shoulder widening

Excavator moving soil to the truck

Excavator putting soil in the truck for removal

Vibrating the newly placed concrete

Placing the concrete into the deck formwork

Close-up, concrete finisher

Placing wet burlap on the newly placed concrete

Placing plastic over the wet burlap and newly placed concrete

Concrete pump hose set-up with containment bin for slurry

Second concrete truck / slurry bin

Overview, both concrete pumps and 110-ton crane

Concrete truck backing in for concrete placement

Placing slurry into the containment bin

Concrete being placed into the concrete pump

Concrete testing prior to placement

Starting to move the concrete pump / hose to the bridge deck

Moving the concrete pump / hose to the bridge deck

Concrete pump / hose in place for concrete placement

Overview, concrete pump truck and two concrete trucks

Overview, concrete pump truck and two concrete trucks

View from below, concrete pump and concrete finisher

View from below of concrete placement

Overview, concrete deck placement

Setting-up the concrete pump for deck placement

View east, concrete deck placement

Setting-up the second concrete pump

Top view, concrete truck filling the concrete pump

Expanded view, of the concrete truck, concrete pump

North view, concrete pump and concrete finisher

Concrete finisher / newly placed concrete

Concrete finisher, concrete deck placement

Concrete finisher and troweling the newly placed concrete

Close-up, troweling the concrete

Close-up, newly placed concrete

Concrete finisher, newly placed concrete being covered with wet burlap

Wetting down the burlap

Concrete pump placing concrete into the formwork

Concrete deck placement

Concrete finisher, newly placed concrete covered with wet burlap

Concrete finisher and troweling newly placed deck concrete

Close-up, placing plastic tarps over wet burlap / concrete

Finishing the edges of the concrete

Telehandler taking the water tote to the south abutment

Totes of water, soaking burlap

Getting the concrete pump ready for pier 2 concrete placement

Using the boat to deliver concrete to pier 2

Using the Manulift to remove the concrete hopper from the boat

Lowering the concrete to the pump

Releasing the concrete into the pump

Concrete hoses in preparation for pier 2 concrete placement

Pier 2 formwork

Pier 2 concrete formwork

Concrete placement on pier 2

Concrete hose connected to the formwork for placement

Vibrating the concrete

South abutment work platform build

South abutment granular, north view deck after first concrete placement

South abutment shoulder widening

Compacting the granular for road widening

Telehandler, moving the water tote

110-ton crane removing the water tote from the bridge

Formwork and rebar for south abutment slab placement

Prewetting the rebar and formwork

Placing concrete and vibrating concrete at the pier 16 haunch

Close-up, pier 16 haunch concrete placement and vibrating

Preparing for the second concrete deck placement

Preparing to set-up the concrete pump truck

Setting-up the concrete pump truck

Concrete pump truck mid-setup

Concrete chute preparing to place concrete in the concrete pump

Concrete pump / containment bin for slurry

Two concrete pump trucks in preparation for the second concrete deck placement

Backing in the second concrete truck to the concrete pump truck

Filling the water totes

View between both concrete trucks backed into the concrete pump truck

Testing the concrete prior to placement

Lifting the concrete pump to the deck for placement

View from below of the concrete pump

Close-up, view from below of concrete deck placement

Filling the concrete pump

Close-up, filling the concrete pump

Pier base 1 rebar

Concrete deck placement

Top view of concrete pump and trucks

Close-up of concrete being pumped into the forms and vibrated

Concrete finisher

Spreading the freshly placed concrete

Concrete hopper, releasing concrete into the formwork

Concrete placement on the south abutment slab

Finishing the concrete slab

Troweling the south abutment slab

Troweling the concrete

Close-up of the concrete finisher

Completed concrete and wet burlap

Close-up of the concrete hose, and finisher

Hand finishing the edges of the concrete

Close-up, finishing the edges of the concrete deck

Finishing the newly placed concrete

Troweling the newly placed concrete deck

Filling the bucket for concrete testing

View from below of concrete deck placement

Expanded view from below of the second concrete deck placement

View north concrete pump and concrete finisher

Placing wet burlap on the wet concrete

Concrete finisher / second concrete deck placement

Placing the second section of concrete deck, vibrating

Hooking-up the concrete finisher to the crane

110-ton preparing to lift the concrete finisher from the deck

110-ton crane starting to lift the concrete finisher from the deck

Starting to remove the concrete finisher from the deck

110-ton crane starting to lower the concrete finisher

Lowering the concrete finisher to the project site

Lowering the concrete finisher

Cleaning concrete hopper

Hooking the barrier wall formwork to the crane

110-ton crane hooked-up to the barge spud

Truck delivering the barrier wall formwork

160-ton crane lower the barrier wall formwork

160-ton crane lifting the water tote to the deck

Newly placed concrete deck covered with wet burlap and plastic

Expanded view, covered concrete deck with soaker hoses

Starting the barrier wall rebar

Newly placed concrete, south abutment slab, covered with wet burlap and plastic

Close-up, barrier wall rebar installation

View north of barrier wall rebar installation

Starting to dig for the light pole base installation

Starting to dig the hole for the light pole base

Completed hole for the light pole base

Excavating for the light pole base

Installing the sonotube in the newly excavated hole

Installed sonotube for the light pole base

Releasing concrete into the sonotube for the light pole base

Lowering the concrete hoper to the sonotube for concrete placement

Close-up, concrete placement

Vibrating the newly placed concrete for the light pole base

Concrete truck placing concrete for the light pole base

Preparing for AVS cores

AVS core drilling

Concrete truck filling the hopper with concrete

The boat taking the concrete hopper to pier 1

Releasing the concrete into the concrete pump

Vibrating the concrete in the formwork

Bringing the full hopper to pier 1 for placement

Pier base 1 formwork, vibrating concrete

Boat removing the empty concrete hopper

Concrete placement, vibrating

Expanded view of pier base 1 concrete placement / vibrating

Finishing the newly placed concrete at pier 1

Manulift preparing to lift the concrete hopper from the boat

Close-up, releasing concrete into the concrete pump

Close-up of the concrete placement and vibrating at pier 1

Releasing concrete into the pump

Preparing for concrete placement on pier base 1

Telehandler taking the concrete hopper to the boat

Telehandler, lowering the concrete hopper to the boat

Overview of pier base 1 concrete placement

View east, pier base 1 concrete placement

Delivering the full concrete hopper to pier 1

Manulift removing the concrete hopper from the boat

160-ton crane lifting the barrier wall formwork to the deck

Lifting the barrier wall formwork to the deck

Placing the second set of barrier wall forms

160-ton crane lifting barrier wall forms

Using the Manulift on the barge to move formwork material to pier 2

Removing material from the Manulift on pier 2

Preparing the concrete pump for the first barrier wall placement

View from below of installed barrier wall formwork

Close-up, releasing slurry from the concrete pump truck

Filling the pump truck with concrete

Preparing for the first barrier wall placement

View from below, releasing concrete into the formwork

Concrete pump, concrete trucks

View from below, vibrating the newly placed concrete

View of the rebar inside the barrier wall forms

View east of the concrete pump

View north, setting up the concrete pump

Completed concrete pad

Section of barrier wall form, after concrete placement

Finishing the concrete

Close-up of the top of the barrier wall

Wet burlap on the fresh concrete

Adding the chamfer to the edges of the concrete

Close-up, top of the barrier wall covered with burlap

Tying down the plastic

Chipping loose concrete from the rebar

Preparing for abrasive blast cleaning

Ready to start abrasive blast cleaning

Starting to abrasive blast clean the rebar

Abrasive blast cleaning

Lifting the barrier wall forms for the second barrier wall placement

Placing concrete into the forms

Vibrating the concrete

Expanded view, concrete placement

Close-up of barrier wall concrete, chamfer

Preparing to install the catch basin

Releasing slurry into the bin

Overview, concrete pump

Concrete pump, releasing slurry

Newly placed concrete, concrete forms

Preparing for the first barrier wall concrete placement

Covering the fresh concrete and burlap with plastic

Placing wet burlap on the newly placed concrete

Preparing the burlap

Starting to lower the catch basin with the excavator

Lowering the catch basin with the excavator

Placing granular around the catch basin

Lowering the compacting machine

Offloading granular for shoulder widening

Telehandler dumping debris

Dumping granular for shoulder widening

Shoulder widening

Spreading the granular for road widening

Starting the rebar for the approach slab

Tying rebar for the approach slab

Rebar mat for the approach slab

Releasing concrete into the hopper

160-ton crane lowering the hopper for approach slab placement

Approach slab placement

Spreading and finishing the concrete approach slab

Vibrating the concrete approach slab

Finishing the newly placed concrete

Finishing the approach slab

Finishing the approach slab

Completed approach slab covered with wet burlap and plastic

Lowering the tote of wet burlap for the approach slab

Finishing the newly placed concrete

Close-up, finishing the approach slab

Placing concrete into the slip form machine

Newly placed section of curb and gutter

Slip form machine, placing concrete curb and gutter

Finishing the newly placed concrete curb and gutter

Close-up, slip form machine placing concrete curb and gutter

Finishing the newly placed concrete curb and gutter

Spraying curing compound on the newly placed curb and gutter

Completed section of curb and gutter

Placing concrete into the concrete pump

Setting up the concrete pump for placement

Filling the bucket with concrete for testing

Testing concrete prior to placement

160-ton crane lifting the concrete hopper to the deck

View north, completed section of concrete barrier wall and barrier wall forms

Placing the second section of the barrier wall

Second barrier wall placement

Placing concrete into the barrier wall forms

Second concrete placement covered with wet burlap and plastic

Concrete placed in the barrier wall forms before vibrating

Lowering the concrete pump to the forms

Vibrating the concrete in the barrier wall forms

Lowering the concrete hopper to the barrier wall forms

View north of the second barrier wall placement

Finishing the barrier wall concrete

Placing the chamfer into the barrier wall concrete

For more information or to be added to our contact list please contact us.

Copyright © 2024 Bay of Quinte Skyway Bridge Rehabilitation. All Rights Reserved.

Catch Base Pro by Catch Themes

Project Overview
Lane Closures
- Notifications
Project Photos
Schedule
Map
FAQs
Contact Us
Useful Links

Home

Scroll Up